dmesg - WPA test
microcode: microcode updated early to revision 0x49, date = 2021-08-11
Linux version 6.1.0-13-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1 (2023-09-29)
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000076241fff] usable
BIOS-e820: [mem 0x0000000076242000-0x0000000076a8bfff] reserved
BIOS-e820: [mem 0x0000000076a8c000-0x0000000076b93fff] usable
BIOS-e820: [mem 0x0000000076b94000-0x000000007707afff] ACPI NVS
BIOS-e820: [mem 0x000000007707b000-0x000000007752ffff] reserved
BIOS-e820: [mem 0x0000000077530000-0x0000000077586fff] type 20
BIOS-e820: [mem 0x0000000077587000-0x0000000077587fff] usable
BIOS-e820: [mem 0x0000000077588000-0x000000007760dfff] reserved
BIOS-e820: [mem 0x000000007760e000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000078000000-0x000000007bffffff] reserved
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x76cb4000 ACPI 2.0=0x76cb4000 ESRT=0x773b2f98 SMBIOS=0xf05e0 SMBIOS 3.0=0x773b7000
secureboot: Secure boot disabled
SMBIOS 3.0.0 present.
DMI: INTEL /E5-A99, BIOS 5.11 11/29/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.451 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x1080000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
x2apic: enabled by BIOS, switching to x2apic ops
last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd90-0x000fcd9f]
esrt: Reserving ESRT space from 0x00000000773b2f98 to 0x00000000773b2fd0.
Using GB pages for direct mapping
RAMDISK: [mem 0x303f1000-0x341effff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000076CB4000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000076CB4098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000076CE77D8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000076CB41D8 0335FD (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x0000000077079F80 000040
ACPI: APIC 0x0000000076CE78E8 000218 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000076CE7B00 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000076CE7B48 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000076CE7BE8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000076CE7C28 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x0000000076CE7F98 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: HPET 0x0000000076CE7FE0 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x0000000076CE8018 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x0000000076CE80A8 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x0000000076CE80D8 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x0000000076CE9230 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x0000000076CE9270 0151F3 (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x0000000076CFE468 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
ACPI: SPCR 0x0000000076CFE4E0 000050 (v01 A M I APTIO V 01072009 AMI. 0005000B)
ACPI: DMAR 0x0000000076CFE530 0000D4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x0000000076CFE608 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Reserving FACP table memory at [mem 0x76ce77d8-0x76ce78e3]
ACPI: Reserving DSDT table memory at [mem 0x76cb41d8-0x76ce77d4]
ACPI: Reserving FACS table memory at [mem 0x77079f80-0x77079fbf]
ACPI: Reserving APIC table memory at [mem 0x76ce78e8-0x76ce7aff]
ACPI: Reserving FPDT table memory at [mem 0x76ce7b00-0x76ce7b43]
ACPI: Reserving FIDT table memory at [mem 0x76ce7b48-0x76ce7be3]
ACPI: Reserving MCFG table memory at [mem 0x76ce7be8-0x76ce7c23]
ACPI: Reserving SSDT table memory at [mem 0x76ce7c28-0x76ce7f94]
ACPI: Reserving UEFI table memory at [mem 0x76ce7f98-0x76ce7fd9]
ACPI: Reserving HPET table memory at [mem 0x76ce7fe0-0x76ce8017]
ACPI: Reserving MSCT table memory at [mem 0x76ce8018-0x76ce80a7]
ACPI: Reserving SLIT table memory at [mem 0x76ce80a8-0x76ce80d4]
ACPI: Reserving SRAT table memory at [mem 0x76ce80d8-0x76ce922f]
ACPI: Reserving WDDT table memory at [mem 0x76ce9230-0x76ce926f]
ACPI: Reserving SSDT table memory at [mem 0x76ce9270-0x76cfe462]
ACPI: Reserving NITR table memory at [mem 0x76cfe468-0x76cfe4d8]
ACPI: Reserving SPCR table memory at [mem 0x76cfe4e0-0x76cfe52f]
ACPI: Reserving DMAR table memory at [mem 0x76cfe530-0x76cfe603]
ACPI: Reserving ASF! table memory at [mem 0x76cfe608-0x76cfe6a7]
Setting APIC routing to cluster x2apic.
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x1a -> Node 0
SRAT: PXM 0 -> APIC 0x1c -> Node 0
SRAT: PXM 0 -> APIC 0x1e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 0 -> APIC 0x1b -> Node 0
SRAT: PXM 0 -> APIC 0x1d -> Node 0
SRAT: PXM 0 -> APIC 0x1f -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107ffd4000-0x107fffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000107fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000076241fff]
node 0: [mem 0x0000000076a8c000-0x0000000076b93fff]
node 0: [mem 0x0000000077587000-0x0000000077587fff]
node 0: [mem 0x000000007760e000-0x0000000077ffffff]
node 0: [mem 0x0000000100000000-0x000000107fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 2122 pages in unavailable ranges
On node 0, zone DMA32: 2547 pages in unavailable ranges
On node 0, zone DMA32: 134 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: SPCR table version 1
ACPI: SPCR: console: uart,io,0x3f8,115200
TSC deadline timer available
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x76242000-0x76a8bfff]
PM: hibernation: Registered nosave memory: [mem 0x76b94000-0x7707afff]
PM: hibernation: Registered nosave memory: [mem 0x7707b000-0x7752ffff]
PM: hibernation: Registered nosave memory: [mem 0x77530000-0x77586fff]
PM: hibernation: Registered nosave memory: [mem 0x77588000-0x7760dfff]
PM: hibernation: Registered nosave memory: [mem 0x78000000-0x7bffffff]
PM: hibernation: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 16477832
Policy zone: Normal
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64", will be passed to user space.
random: crng init done
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 126976 bytes
printk: log_buf_len min size: 131072 bytes
printk: log_buf_len: 262144 bytes
printk: early log buf free: 117080(89%)
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 32.
Memory: 1860460K/66958192K available (14342K kernel code, 2329K rwdata, 9132K rodata, 2772K init, 17416K bss, 1425000K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 40153 entries in 157 pages
ftrace: allocated 157 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1088, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x000000773e3000 end: 0x000000773f3fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2112bb1ff6d, max_idle_ns: 440795217991 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.90 BogoMIPS (lpj=9177804)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Mitigation: Clear CPU buffers
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
LSM support for eBPF active
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2698 v3 @ 2.30GHz (family: 0x6, model: 0x3f, stepping: 0x2)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 1776
Estimated ratio of average max frequency by base frequency (times 1024): 1469
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16
MDS CPU bug present and SMT on, data leak possible. See for more details.
MMIO Stale Data CPU bug present and SMT on, data leak possible. See for more details.
#17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
smp: Brought up 1 node, 32 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 32 processors activated (146844.86 BogoMIPS)
node 0 deferred pages initialised in 72ms
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x76b94000-0x7707afff] (5140480 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1719868556.232:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 3 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:2fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:2feb] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:2fec] type 00 class 0x088000
pci 0000:ff:0d.5: [8086:2fed] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:2fee] type 00 class 0x088000
pci 0000:ff:0d.7: [8086:2fef] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb503000-0xfb503fff]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x383ffff00000-0x383ffff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb502000-0xfb5023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x383ffff10000-0x383ffff13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: Enabling MPC IRBNCE
pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: Enabling MPC IRBNCE
pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb501000-0xfb5013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb500000-0xfb5007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x383ffff15000-0x383ffff150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0x383ffff14000-0x383ffff14fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:1c82] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0x383fe0000000-0x383fefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0x383ff0000000-0x383ff1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: BAR 3: assigned to efifb
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:03:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0x383fe0000000-0x383ff1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:15f3] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff]
pci 0000:05:00.0: reg 0x1c: [mem 0xfb300000-0xfb303fff]
pci 0000:05:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [mem 0xfb100000-0xfb3fffff]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:06:00.0: reg 0x18: [mem 0xfb404000-0xfb404fff 64bit]
pci 0000:06:00.0: reg 0x20: [mem 0xfb400000-0xfb403fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 3
ACPI: PCI: Interrupt link LNKD configured for IRQ 5
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 7
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x76242000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76b94000-0x77ffffff]
e820: reserve RAM buffer [mem 0x77588000-0x77ffffff]
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: bridge control possible
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
pnp 00:05: [dma 0 disabled]
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x380000000000-0x3800001fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0x383fe0000000-0x383ff1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: bridge window [mem 0x380000000000-0x3800001fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [mem 0xfb100000-0xfb3fffff]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: resource 8 [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0x383fe0000000-0x383ff1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:04: resource 2 [mem 0x380000000000-0x3800001fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfb100000-0xfb3fffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfb400000-0xfb4fffff]
pci 0000:00:05.0: disabled boot interrupts on device [8086:2f28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23196 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23402 usecs
pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
pci 0000:03:00.1: extending delay after power-on from D3hot to 20 msec
pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
DMAR: No SATC found
DMAR: IOMMU feature sc_support inconsistent
DMAR: IOMMU feature dev_iotlb_support inconsistent
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
Trying to unpack rootfs image as initramfs...
pci 0000:00:1b.0: Adding to iommu group 0
pci 0000:ff:0b.0: Adding to iommu group 1
pci 0000:ff:0b.1: Adding to iommu group 1
pci 0000:ff:0b.2: Adding to iommu group 1
pci 0000:ff:0c.0: Adding to iommu group 2
pci 0000:ff:0c.1: Adding to iommu group 2
pci 0000:ff:0c.2: Adding to iommu group 2
pci 0000:ff:0c.3: Adding to iommu group 2
pci 0000:ff:0c.4: Adding to iommu group 2
pci 0000:ff:0c.5: Adding to iommu group 2
pci 0000:ff:0c.6: Adding to iommu group 2
pci 0000:ff:0c.7: Adding to iommu group 2
pci 0000:ff:0d.0: Adding to iommu group 3
pci 0000:ff:0d.1: Adding to iommu group 3
pci 0000:ff:0d.2: Adding to iommu group 3
pci 0000:ff:0d.3: Adding to iommu group 3
pci 0000:ff:0d.4: Adding to iommu group 3
pci 0000:ff:0d.5: Adding to iommu group 3
pci 0000:ff:0d.6: Adding to iommu group 3
pci 0000:ff:0d.7: Adding to iommu group 3
pci 0000:ff:0f.0: Adding to iommu group 4
pci 0000:ff:0f.1: Adding to iommu group 4
pci 0000:ff:0f.2: Adding to iommu group 4
pci 0000:ff:0f.3: Adding to iommu group 4
pci 0000:ff:0f.4: Adding to iommu group 4
pci 0000:ff:0f.5: Adding to iommu group 4
pci 0000:ff:0f.6: Adding to iommu group 4
pci 0000:ff:10.0: Adding to iommu group 5
pci 0000:ff:10.1: Adding to iommu group 5
pci 0000:ff:10.5: Adding to iommu group 5
pci 0000:ff:10.6: Adding to iommu group 5
pci 0000:ff:10.7: Adding to iommu group 5
pci 0000:ff:12.0: Adding to iommu group 6
pci 0000:ff:12.1: Adding to iommu group 6
pci 0000:ff:12.4: Adding to iommu group 6
pci 0000:ff:12.5: Adding to iommu group 6
pci 0000:ff:13.0: Adding to iommu group 7
pci 0000:ff:13.1: Adding to iommu group 7
pci 0000:ff:13.2: Adding to iommu group 7
pci 0000:ff:13.3: Adding to iommu group 7
pci 0000:ff:13.6: Adding to iommu group 7
pci 0000:ff:13.7: Adding to iommu group 7
pci 0000:ff:14.0: Adding to iommu group 8
pci 0000:ff:14.1: Adding to iommu group 8
pci 0000:ff:14.2: Adding to iommu group 8
pci 0000:ff:14.3: Adding to iommu group 8
pci 0000:ff:14.4: Adding to iommu group 8
pci 0000:ff:14.5: Adding to iommu group 8
pci 0000:ff:14.6: Adding to iommu group 8
pci 0000:ff:14.7: Adding to iommu group 8
pci 0000:ff:16.0: Adding to iommu group 9
pci 0000:ff:16.1: Adding to iommu group 9
pci 0000:ff:16.2: Adding to iommu group 9
pci 0000:ff:16.3: Adding to iommu group 9
pci 0000:ff:16.6: Adding to iommu group 9
pci 0000:ff:16.7: Adding to iommu group 9
pci 0000:ff:17.0: Adding to iommu group 10
pci 0000:ff:17.1: Adding to iommu group 10
pci 0000:ff:17.2: Adding to iommu group 10
pci 0000:ff:17.3: Adding to iommu group 10
pci 0000:ff:17.4: Adding to iommu group 10
pci 0000:ff:17.5: Adding to iommu group 10
pci 0000:ff:17.6: Adding to iommu group 10
pci 0000:ff:17.7: Adding to iommu group 10
pci 0000:ff:1e.0: Adding to iommu group 11
pci 0000:ff:1e.1: Adding to iommu group 11
pci 0000:ff:1e.2: Adding to iommu group 11
pci 0000:ff:1e.3: Adding to iommu group 11
pci 0000:ff:1e.4: Adding to iommu group 11
pci 0000:ff:1f.0: Adding to iommu group 12
pci 0000:ff:1f.2: Adding to iommu group 12
pci 0000:00:00.0: Adding to iommu group 13
pci 0000:00:01.0: Adding to iommu group 14
pci 0000:00:01.1: Adding to iommu group 15
pci 0000:00:03.0: Adding to iommu group 16
pci 0000:00:05.0: Adding to iommu group 17
pci 0000:00:05.1: Adding to iommu group 18
pci 0000:00:05.2: Adding to iommu group 19
pci 0000:00:05.4: Adding to iommu group 20
pci 0000:00:14.0: Adding to iommu group 21
pci 0000:00:1a.0: Adding to iommu group 22
pci 0000:00:1c.0: Adding to iommu group 23
pci 0000:00:1c.2: Adding to iommu group 24
pci 0000:00:1c.3: Adding to iommu group 25
pci 0000:00:1d.0: Adding to iommu group 26
pci 0000:00:1f.0: Adding to iommu group 27
pci 0000:00:1f.2: Adding to iommu group 27
pci 0000:00:1f.3: Adding to iommu group 27
pci 0000:00:1f.6: Adding to iommu group 27
pci 0000:03:00.0: Adding to iommu group 28
pci 0000:03:00.1: Adding to iommu group 28
pci 0000:05:00.0: Adding to iommu group 29
pci 0000:06:00.0: Adding to iommu group 30
DMAR: Intel(R) Virtualization Technology for Directed I/O
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000006d4f5000-0x00000000714f5000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 63484K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:01.0: AER: enabled with IRQ 25
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.1: AER: enabled with IRQ 26
pcieport 0000:00:03.0: PME: Signaling with IRQ 28
pcieport 0000:00:03.0: AER: enabled with IRQ 28
pcieport 0000:00:1c.0: PME: Signaling with IRQ 29
pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:1c.2: PME: Signaling with IRQ 30
pcieport 0000:00:1c.3: PME: Signaling with IRQ 31
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.SCK0.CP00: Found 2 idle states
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: setting system clock to 2024-07-01T21:15:57 UTC (1719868557)
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: framebuffer at 0x383ff1000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: sig=0x306f2, pf=0x1, revision=0x49
microcode: Microcode Update Driver: v2.2.
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1102896325, 378831)->(1448873824, -345598668)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2772K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1108K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64
tsc: Refined TSC clocksource calibration: 2294.685 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139843abd, max_idle_ns: 440795210670 ns
clocksource: Switched to clocksource tsc
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: button: Power Button [PWRF]
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20220331/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20220331/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 2/4 memory slots populated (from DMI)
Intel(R) 2.5G Ethernet Linux Driver
Copyright(c) 2018 Intel Corporation.
igc 0000:05:00.0: PCIe PTM not supported by PCIe bus/controller
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb502000
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
ehci-pci 0000:00:1d.0: EHCI Host Controller
hub 2-0:1.0: USB hub found
r8169 0000:06:00.0 eth0: RTL8168h/8111h, 22:34:4d:08:4d:da, XID 541, IRQ 37
r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
hub 2-0:1.0: 15 ports detected
r8169 0000:06:00.0 enp6s0: renamed from eth0
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb501000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.1.0-13-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
pps pps0: new PPS source ptp0
igc 0000:05:00.0 (unnamed net_device) (uninitialized): PHC added
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.0-13-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
igc 0000:05:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0000:05:00.0 eth0: MAC: 1c:fd:08:76:a7:8d
igc 0000:05:00.0 enp5s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb500000 port 0xfb500100 irq 38
ata2: SATA max UDMA/133 abar m2048@0xfb500000 port 0xfb500180 irq 38
ata3: SATA max UDMA/133 abar m2048@0xfb500000 port 0xfb500200 irq 38
ata4: SATA max UDMA/133 abar m2048@0xfb500000 port 0xfb500280 irq 38
ata5: SATA max UDMA/133 abar m2048@0xfb500000 port 0xfb500300 irq 38
ata6: SATA max UDMA/133 abar m2048@0xfb500000 port 0xfb500380 irq 38
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-9: new full-speed USB device number 2 using xhci_hcd
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-11: SPCC Solid State Disk, H220916a, max UDMA/133
ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata6.00: ATA-8: SK hynix SC210 mSATA 256GB, 20001L00, max UDMA/133
ata6.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
scsi 0:0:0:0: Direct-Access ATA SPCC Solid State 916a PQ: 0 ANSI: 5
ata6.00: configured for UDMA/133
ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-9: WDC WD80EDAZ-11TA3A0, 81.00A81, max UDMA/133
ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATA-10: ST6000NM0024-1HT17Z, SN06, max UDMA/133
ata3.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: Features: NCQ-sndrcv
ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
ata4.00: ATA-10: ST6000NM0024-1HT17Z, SN06, max UDMA/133
ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata4.00: Features: NCQ-sndrcv
ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: configured for UDMA/133
ata5.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133
ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: Features: Trust NCQ-sndrcv NCQ-prio
ata5.00: configured for UDMA/133
ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: supports DRM functions and may not be fully accessible
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-9: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-9: Product: USB Receiver
usb 2-9: Manufacturer: Logitech
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD80EDAZ-11T 0A81 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST6000NM0024-1HT SN06 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST6000NM0024-1HT SN06 PQ: 0 ANSI: 5
hid: raw HID events driver (C) Jiri Kosina
scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5
usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
scsi 5:0:0:0: Direct-Access ATA SK hynix SC210 m 1L00 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:046D:C52B.0001/input/input5
sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
sd 3:0:0:0: [sdd] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sd 3:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C52B.0002/input/input6
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C52B.0002/input/input7
sdd:
sd 3:0:0:0: [sdd] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C52B.0002/input/input8
hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input2
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 5:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sde] Preferred minimum I/O size 512 bytes
sde:
sd 5:0:0:0: [sde] Attached SCSI disk
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input2
input: Logitech Wireless Device PID:4024 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input10
input: Logitech Wireless Device PID:4024 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input11
hid-generic 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4024] on usb-0000:00:14.0-9/input2:1
input: Logitech Wireless Device PID:1017 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C52B.0003/0003:046D:1017.0005/input/input15
hid-generic 0003:046D:1017.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:1017] on usb-0000:00:14.0-9/input2:2
input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input19
logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-9/input2:1
input: Logitech Anywhere MX as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C52B.0003/0003:046D:1017.0005/input/input20
logitech-hidpp-device 0003:046D:1017.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-0000:00:14.0-9/input2:2
raid6: avx2x4 gen() 22146 MB/s
raid6: avx2x2 gen() 24153 MB/s
raid6: avx2x1 gen() 30722 MB/s
raid6: using algorithm avx2x1 gen() 30722 MB/s
raid6: .... xor() 17545 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 252.26-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Reached target virt-guest-shutdown.target - Libvirt guests shutdown.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting proc-fs-nfsd.mount - NFSD configuration filesystem...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: Finished blk-availability.service - Availability of block devices.
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
systemd[1]: Starting systemd-journald.service - Journal Service...
pstore: Using crash dump compression: deflate
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
pstore: Registered efi as persistent store backend
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
loop: module loaded
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: modprobe@loop.service: Deactivated successfully.
systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
fuse: init (API version 7.37)
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
EXT4-fs (sda2): re-mounted. Quota mode: none.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Activating swap swapfile.swap - /swapfile...
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
Adding 33554428k swap on /swapfile. Priority:-2 extents:158 across:989933064k SSFS
systemd[1]: Activated swap swapfile.swap - /swapfile.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Finished systemd-sysusers.service - Create System Users.
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
ACPI: bus type drm_connector registered
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[544]: Received client request to flush runtime journal.
[PCSPP,TRISTATE,EPP]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sr 4:0:0:0: Attached scsi generic sg4 type 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
lp0: using parport0 (polling).
input: PC Speaker as /devices/platform/pcspkr/input/input21
iTCO_vendor_support: vendor-support=0
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input24
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input25
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC MC0: Giving out device to module sb_edac controller Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Haswell SrcID#0_Ha#1: DEV 0000:ff:12.4 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Quota mode: none.
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none.
audit: type=1400 audit(1719868561.719:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1091 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1089 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1088 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1080 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1083 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1083 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1087 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1087 comm="apparmor_parser"
audit: type=1400 audit(1719868561.719:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1087 comm="apparmor_parser"
intel_rapl_common: Found RAPL domain package
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 535.183.01 Sun May 12 19:39:15 UTC 2024
kauditd_printk_skb: 15 callbacks suppressed
audit: type=1400 audit(1719868561.807:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=1090 comm="apparmor_parser"
audit: type=1400 audit(1719868561.807:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=1090 comm="apparmor_parser"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 535.183.01 Sun May 12 19:31:08 UTC 2024
[drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0
NET: Registered PF_QIPCRTR protocol family
r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
r8169 0000:06:00.0 enp6s0: Link is Down
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
bridge0: port 1(vnet3) entered blocking state
bridge0: port 1(vnet3) entered disabled state
device vnet3 entered promiscuous mode
bridge0: port 1(vnet3) entered blocking state
bridge0: port 1(vnet3) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
bridge0: port 1(vnet3) entered disabled state
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
igc 0000:05:00.0 enp5s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
bridge0: port 2(enp5s0) entered blocking state
bridge0: port 2(enp5s0) entered disabled state
device enp5s0 entered promiscuous mode
bridge0: port 2(enp5s0) entered blocking state
bridge0: port 2(enp5s0) entered forwarding state
NFSD: Using nfsdcld client tracking operations.
NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
audit: type=1400 audit(1719868574.631:28): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=2639 comm="cupsd" capability=12 capname="net_admin"
logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected.
nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
nvidia-uvm: Loaded the UVM driver, major device number 241.
/dev/sr0: Can't open blockdev
/dev/sr0: Can't open blockdev
/dev/sr0: Can't open blockdev
/dev/sr0: Can't open blockdev